Presets

change presets with the drop-down menu or the [<] [>] arrows.

Options

click to access commands: Load a user preset, Save a new preset.

Switch between the Main page, the A and B layer edit pages, the Seq (arpeggiator) page, and the FX page.

MPE Power

enable MPE mode.

MPE Bend

set the pitch-bend range in MPE mode (0–96 semitones).

Voices

set the global polyphony (8–64 voices).

Bend

set the global pitch-bend range (0–12 semitones).

Set the global output level with VU metering.

Power Layer

click to disable the layer.

Sound

select the layer sound via the menu browser, or use the [<] [>] arrows. The undo button reverts without changes; [X] closes the browser.

Autoload

automatically loads the selected sound.

Edit

access the layer edit page for this layer.

Options

menu commands: Reset Parameters, Copy Parameters To Part A/B, and Select a Random Layer.

Proximity Explorer

machine-learning powered smart suggestion engine. The centre dot marks the loaded sound; the 8 surrounding dots are suggestions, colour-coded by category. Click Suggest Similar Layers to load another set of suggestions.

Keyboard Range

click-drag or double-click to set the low and high note for the layer.

Layer Volume

click-drag or double-click to set the layer level (0–4×).

Layer XFade

drag to set the balance between layer A and B.

Modulation Depth

drag the knob (with shape icon) to set the crossfade modulation depth.

Invert Modulation

click to invert the crossfade modulation direction.

Layer XFade Modulation Shape

set the modulation waveform (Sine, Triangle, Square or Saw).

Host Sync

enable/disable tempo sync of the modulation speed.

Six global macro knobs, each with its own on/off switch, for quick performance shaping:

Drift

analog-style pitch/timing drift.

Tone

overall brightness.

Crush

bit-crush / degrade amount.

Phase

phaser-style movement.

Cloud

ambience / texture amount.

Feedback

feedback effect amount.

Sound

select the layer sound via menu or arrows.

Options

drop-down commands: Reset Parameters, Copy Parameters To Part A/B, and Select a Random Layer.

Gain

adjust the overall layer level (0–4×).

Pan

adjust the stereo position.

MIDI Curve

click and drag to adjust the dynamics response curve.

Smooth Filter

velocity amount of a 6 dB/oct LP filter for smooth timbre transitions (0–100%).

ADSR

amplitude envelope — Attack (0–10 s), Decay (0–20 s), Sustain (0–100%), Release (0.02–20 s).

Attack & Decay Curve

click-drag to adjust the shape of the attack and decay/release stages.

Power

activate the filter.

Mode

choose Xpander, VCF-20, Comb, Ladder, or VCF 4023.

Cutoff

filter cutoff frequency (20 Hz – 20 kHz).

Q

filter resonance (0–100%).

Mode Control

each filter type adds one control beside Cutoff: Xpander — Mode (LP, BP or HP) plus Drive (±20 dB); VCF-20 — HP/LP balance; Comb — Plus/Minus polarity; Ladder — Drive; VCF 4023 — High-Pass amount.

Env Depth

amount of the filter envelope applied to the cutoff (bipolar, ±100%).

ADSR

dedicated filter envelope — Attack (0–10 s), Decay (0–20 s), Sustain (0–100%), Release (0–20 s).

Attack & Decay Curve

click-drag to reshape filter envelope stages.

Play Mode

set playback to Poly, Poly Portamento, Mono Retrigger, or Mono Portamento.

Octave

transpose in octaves (±5).

Color

shift the timbre using adjacent samples (±12).

Pitch

fine-tune pitch (±12 semitones).

Depth

pitch envelope depth (±36 semitones).

Time

pitch glide time (0–10 s).

Time Curve

click-drag to adjust the glide time curve.

Power

activate unison.

Voices

2–8 unison voices.

Detune

detune amount across unison voices (5–50 cents).

Spread

stereo width of unison voices (0–100%).

Click the FX tab to access the Layer Effects page (wave shaper, flanger, chorus, phaser, equalizer and send FX sends). See the Layer Effects section below.

Click the tab to return to the Layer Edit page.

Power

activate the effect.

IN / Out

input and output gain (±40 dB).

Mode

select the shaping curve.

Amount

effect amount (0–100%).

Mix

dry/wet balance.

Power

activate the effect.

Frequency

modulation speed (0.01–10 Hz, or tempo-synced).

Host Sync

sync speed to host tempo.

Delay

delay time.

Feedback

feedback amount (0–100%).

Mix

dry/wet balance.

Power

activate the effect.

Speed

modulation speed (0.01–1 Hz).

Depth

modulation depth (1–40 cents).

Edge

chorus colour (−0.9 to +0.9).

Mix

dry/wet balance.

Power

activate the effect.

Frequency

modulation speed (0.01–10 Hz, or tempo-synced).

Host Sync

sync speed to host tempo.

Order

number of phase-shift stages (1–12).

Feedback

feedback amount (±100%).

Mix

dry/wet balance.

Power

activate the EQ.

High / Mid / Low

gain for each frequency band (±24 dB).

Crossover Frequency ƒ

boundary frequencies between the low/mid (20–1000 Hz) and mid/high (2–20 kHz) bands.

Power

activate individual sends: Sparkverb, Convolution, Delay and Feedback.

Send Level

send amount per effect (0–4).

Click the switch at the right of any knob to reveal available modulators — LFO A, LFO B, Step Modulator 1, Step Modulator 2, and more. See the Modulation Edit section below.

Power

enable/disable LFO A.

Shape

select the modulation waveform (Sine, Triangle, Square, Saw, Square PW1, Square PW2).

Frequency

modulation speed (0.01–20 Hz free, or tempo-synced note values when Host Sync is on).

Host Sync

sync LFO speed to host tempo.

Phase

LFO start phase.

Delay

delay before LFO begins.

Rise

rise time of the LFO amount.

Depth

modulation depth (0–100%).

Mode

Legato or Retrigger.

Power

enable/disable LFO B.

Shape

select from 20 waveforms, including 14 complex shapes.

Frequency & Host Sync

same as LFO A.

Humanize

add randomness to the LFO (0–100%).

Smooth

smooth the LFO output.

Invert

invert LFO phase.

Mode

Legato or Retrigger.

Depth

modulation depth (0–100%).

Two identical step modulators are available.

Step Editor

click-drag each step to set its modulation amount.

Shift

shift steps left or right with the [<] [>] arrows.

Step Pattern Menu

open the pattern panel to select a preset pattern.

Bipolar

enable/disable bipolar mode.

Smooth

smooth transitions between steps.

Invert

invert the modulation pattern.

Clear

initialize the pattern.

Steps

number of steps (1–64).

Speed

modulation speed (0.01–20 Hz free, or tempo-synced).

Host Sync

sync speed to host tempo.

Mode

Legato or Retrigger.

Internally-modulatable parameters show modulation circles to the left of their knobs. Click-drag a circle to set the modulation amount for the active modulator.

The button to the right of a modulatable knob opens the modulation panel — a full overview of all modulation assignments for that parameter.

A / B tab

select which arpeggiator to edit.

Power

enable/disable the arpeggiator.

Mode

Arpeggiator, Phraser, or Polyphonic.

Octave Low/High

set the lower and upper bounds of the sequence (Phraser mode).

Motion

set direction: As Played, Up, Down, or Up & Down (Arp mode).

Speed

step duration (tempo-synced).

Steps

number of steps (1–16).

Octave

octave range of the arpeggiation (0–5).

Step Editor rows

Vel: click-drag to set per-step velocity (0–127); Link: tie the step to the previous one; Mode: set step type — Single, Lowest or Highest (basic); 4th, 5th, 6th, 9th, Octave− or Octave+ (harmonized); As Played or Inverted ±1/±2 (chord); or Bend Up/Down; Pitch: semitone offset (−12 to +12); Octave: octave offset (−2 to +2); Repeat: repeat the step 1–8 times; Gate: step gate duration; Pan: step stereo position. Click the triangle button on each row to initialize, randomize, or load a preset.

Change arpeggiator presets via the drop-down menu or the [<] [>] arrows. The options menu lets you Save and Load custom patterns.

Displays the chord type detected from the current incoming MIDI notes.

Shift all steps one position ahead or behind using the [<] [>] arrows on either side of the Step Editor.

Enable/disable dual arpeggiator mode — Arp B uses Arp A's arpeggiation pattern.

Send Effects.

Power

enable/disable the reverb.

Size

reverb room size (4–50).

Decay

reverb decay time (0–100%).

High / Low

multiply the decay time for high and low frequencies (0–100%).

Gain

output gain.

Send Effects.

Power

enable/disable.

IR

select an impulse response via menu or arrows.

Time

reverb time (0–100%).

PreDelay

delay before reverb starts (0–100 ms).

Width

stereo width, mono to wide (±100%).

Gain

output gain.

Send Effects.

Power

enable/disable.

Time

delay time (tempo-synced).

Feedback

feedback amount (0–100%).

High / Low Cut

high-cut (1–20 kHz) and low-cut (20 Hz–4 kHz) filters on the delay output.

In / Out Width

stereo width at the input and output stages (0–100%).

Gain

output gain.

Send Effects.

Power

enable/disable.

Comb

comb filter amount (0–100%).

BP Cutoff

band-pass filter cutoff (0–100%).

Gain

output gain.

Bus Effects.

Power

enable/disable.

Amount

drive amount (0–30 dB).

Tone

brightness — low-pass filter frequency (100 Hz – 20 kHz).

Gain

output gain (−40 to +10 dB).

Bus Effects.

Power

enable/disable.

High / Mid / Low Gain

boost or cut each band (±24 dB).

Low/Mid ƒ & Mid/High ƒ

crossover frequencies between the low/mid and mid/high bands.

Bus Effects.

Power

enable/disable.

Threshold

input level at which limiting begins (−40 to 0 dB).